pimp, yo

http://www.xandolabs.com/

http://coachjburk.blogspot.com/

http://offensivebreakdown.blogspot.com/

http://coachbdud.blogspot.com/

http://coachbindelfootball.blogspot.com/

http://footballpressbox.blogspot.com/

Check 'em out, B

Not that I care.....

Not that I care in the least, and I really do like Tim Tebow (even as a quarterback), but given the heavy-handed approach of the NFL and its regulations, I wonder if we will see a fine issued soon?

http://www.uniformviolation.com/RulesRegs/RulesRegs-NFL-Gen.php

NFL and NCAA rules forbid players from marking their uniforms…

… The rule covers the helmet, jersey, pants, shoes, tape, wristbands, and headbands. No writing on any part of the body. Before each game uniform reps — former NFL players — prowl the sidelines looking for violators. When the teams go back into the locker room before the game starts, they are given a list of players who are in violation of the rule.

If they come out for the kickoff without removing the writing, they will be fined. According to Johnny Rembert, the uniform rep in Jacksonville and a 10-year NFL veteran, fines start at $5,000.

I'm not a believer, so I should preface this with the fact that I am happy Tebow and Colt McCoy are excelling at the quarterback position this season.  Both bring an exciting dynamic to the game, and both have real strong convictions in their faiths.

Off Season Project

My "off season project" is near complete. I have essentially burned my physical video library of DVDs to a 1.5 Terabyte external hard drive as a backup against scratches or loss.

It may seem like a lot of unnecessary work, but searching, organizing, and keeping up with over 453 NCAA/NFL game film DVDs (plus a few hundred clinic discs) can be tedious and subject to error. I had no real feasible method other than to store the discs on large disc spindles, which began taking up more and more physical space. It was herding cats to find a disc (even after having grouped spindles by categories), then to go through the process of creating a copy was worse.


Now, once I receive a disc, I just pop it in the drive, rip the ISO image to my portable hard drive and store it away as a master disc.

It also makes providing copies for other coaches that much easier, too. I just pull from the ISO image catalog, pop in a blank disc, and burn....done. This way, the bookshelf full of DVDs, the entire collection is available on a paperback-sized drive, available to take with me anywhere and burn (dvd-ready discs) anywhere with a DVD-RW drive.

I have toyed with the notion of ripping the complete video files entirely as .avi / mpegs and store on a HD to viewed via a media sharing network, but it is completely limited to the DLNA/LAN where it is set up and not as practical as just throwing in the original DVD.

1. Open DVD Decrypter

2. Select MODE (ISO) > Read (the DVD you have in the drive)

3. Choose where you what the disc image written to ......

4. Hit the Graphic at the bottom.................done

To burn, just do the opposite (Write > source [local storage] to destination [DVD] ).

you get what you pay for

Thanks to *Coach Hoover for the heads up on this (and saving my ass)....Yahoo Video is removing all of its existing content in March.

http://www.techieinsider.com/news/4873

On December 15, 2010 the functionality to upload a video to Yahoo! Video was removed and a download utility, available through March 14, 2011, was added to users’ video profiles to allow retrieval of content. The user-generated content will be removed from Yahoo! Video on March 15, 2011. We apologize if this causes you any inconvenience.

Thanks, dickwads. Now my Yahoo account will only be valid for the annual fantasy football pastings.

So, my attempt at avoiding the issues I had with GoogleVideo (2006-2008) randomly pulling any game film I posted (not broadcast footage) have hit a brick wall. I am reluctantly migrating all my 500 some Yahoo videos into my Youtube account to conform to the Google monolith.

Change is good, I suppose, and this was something I was actually planning on doing anyway to make the content more accessible for mobile users. This affords me an opportunity to experiment with creating higher resolution game clips for viewing online. Oh well, you get what you pay for (both free...........for now). Also, likely unrelated, I'm itching for an opportunity to use my Captivate's TV-out function to record practice footage (in 720p) and connect it to a big screen with component cables after practice to go over coaching points (beats lugging around a camcorder).


*be on the look out for a moster project Coach Hoover is putting together in the coming weeks

another great blog worth checking out that just took off this past fall is

http://footballpressbox.blogspot.com/

Battle of the Boards (Auburn / Oregon)

As we all anticipate what should be an exciting match up between two explosive offenses in Auburn and Oregon for the National Championship, we may be able to glean some useful lessons from both these teams. Both represent fast-paced no-huddle offenses that are borrowing on basic concepts and adapting them as the lastest offensive innovation. Ironic or fittingly, I suppose, that we covered both teams offenses earlier in the Fall (Oregon / Auburn), but what stands out to most people about each is not their plays or scheme so much, as their method of operation...................fast. In this post, we will provide some insight into how one of these teams facilitates this tempo via sideline signal boards.

While it has garnered quite a bit of attention (and favor) with the BooYah Sports Network by featuring their self-heralded icons during Oregon games, Auburn's similar practice has been rather subdued. Both essentially share the system of communication, along with other offenses (Oklahoma State).

It may appear as complex chaos, the methodology is quite simple. You have a base offense and concepts that you run, all you are doing is eliminating the unnecessary huddle and parsing the relevant pieces of information needed on a given play. The no-huddle concept has been around for a while, but recently it has undergone more efficient tweaking, accentuating the irrelevance of the huddle. If you've ever spent anytime coaching offense, you'll know just how tedious and frustrating it can be dicking around "coaching" the huddle procedure ('YOU go here...you go there....no, no, no...you're supposed to face that way!").

To better explain this process, I've included examples of how this information would be coded and signaled to flesh out how it actually works. Lets explore what needs to be delivered to the players....

Formation
Motion
Play direction
Play Type

This is common information usually shared in the huddle, before anything is presented to the defense. What the no-huddle is doing is presenting a formation, allowing the defense to match it, then call an offensive play based on this information and/or change it (if necessary). All this can be accomplished outside the confines gathering the players together; just line up, get the play, and execute it.

How information is being communicated (the huddle is a waste of resources)

As the offense nears the spot, they will assume the same formation as the last play (though nothing really changes for the offensive line, quarterback, and fullback on most every play). The formation will be signaled (usually by a sideline player) as soon as the previous play ends along with any pre-snap movement until that formation is achieved. Next, the play type will be given to the players. The quarterback will begin the cadence, repeating the playside/series code, and snap the ball. Once the play ends, the next begins and the process repeats.

This necessitates an offense to develop its own language, with multiple terms (and signals) to deliver the same information, so the code cannot be easily ‘cracked’. This is achieved by concept association and by allowing the position units to devise the terms they want to use (ownership of association).

Sideline Communication
The sideline usually features up to four different signalers consisting quarterbacks, receivers, graduate assistants, assistant coaches, and coordinators. These players will be signaling something every down, though not every signaler will be ‘live’ (will be signaling bogus dummy calls). The common method is broken down as follows;

Play Caller: coordinator / coordinator assistant
Signaler: position coach (runs, play action, screens)
Color: player (black or blue = right / white or gold = left / red = play change/check)
Signal Board: GA (passes)

All these individuals will present their signals to the on-field players until the ball is snapped to ensure that no player did not receive the information. So once a play ends, the 'next play' begins with the entire offense setting up on the spot of the ball, looking to their sideline for new information.

The real key to the team of signalers is the Color designator. Colors will determine if the signaler is hot (or the board is hot) as well as reinforce what the playside will be.

Black, White, Green, Pink, Brown – Signaler is Hot
Blue, Gold, Red – Board is Hot

So by this example, after a formation is given and the sideline player signaling “Black” (right is playside / signaler is hot) the players on the field will look to the signaler for the play. If the color signaler is delivering “Blue”, they can understand that the playside is right and the board is hot (i.e. pass routes) and disregard the signaler.

To better explain this process, I've included examples of how this information would be coded and signaled to flesh out how it actually works. Let’s explore what needs to be delivered to the players....

As you can see by the charts above, the no-huddle concept of signaling can deliver this information quickly through association and will generally only affect the 5 specialists on offense.

Next, the play type (run, play action, screen, or pass) can be delivered. The key is to group the play type by genus or series.

“If the reference is X, I will know that the play is going to be ‘this type’, now all I need to know is which one”

In our examples we can classify the play types as;
Runs are represented by NFL teams (or mascot)
Passes are represented by College teams (or mascot)
Play action passes will be represented by the run action signal with a (color) tag
Screens are based off locations (city or state)

We saw this earlier (and it is quite common) during the write-up on Louisiana Tech’s first few practices last spring as well as Bo Pelini’s base defense concepts, where commonly used categories represent different types of plays.

Take these examples for instance;
I=draws the association of “I for IZ” that is commonly tied to the NFL team, Indianapolis Colts, so any horse reference would be able to convey a zone run.

P=draws the association of “P for Power” (i.e. NFL team with a ‘P’ is the Patriots), so all you would have to do is deliver an iconic symbol of what people would associate a ‘patriot’ with.

During this entire process, the quarterback can eyeball the sideline while ‘translating’ audibly to the line and backs…. “Blue, Blue….Cowboy! Cowboy!” (right counter) without the defense really having any idea of what is going on. Alternatively, the very next play could be called “Black, Blue….Dallas! Dallas!”, and still be running the same play.

With passing plays, it is the same process, but this is where the boards come in. If the board is 'hot', the bogus play type will be called out and let the offensive line know it is not run-action, so they will need to listen for the protection. The fullback will then call out a play-specific protection on every down (much like the TFS system will have the back make a 'roger' / 'louie' call each play).

When the board is ‘hot’ the quadrants will represent primary and secondary receiver routes based on the route tree used. So, you could have your passing concepts represented by both associations (NCAA teams/mascots deliver a passing concept) as well as number representations (“20” / “97”). See below for a standard chart for passing concepts and marry them up with the included passing tree.

If you are calling a smash concept, you could just call "Razorback" (Arkansas) or the "20" (or "90"). The "2" in this call would represent the initial read side (right) and the "0" indicates primary receiver running the hitch.